All Geared Lathe Machine

All Geared Lathe Machine
All Geared Lathe Machine

Tuesday, 29 January 2013

Double Head Boring Machine



SPM For Conveyor Idlers
Often machines are built to increase the production and with utmost accuracy. Here comes the introduction of Special Purpose Machinery or in short called SPM. Preet Lathe manufactures SPM Machinery for Conveyor Idlers or called as Pipe Boring Machine. 


Double Ended Conveyor Idler Horizontal Boring Machine comes with Two Heads powered by All Geared Heads and special Chucks for Boring. This machine is capable of Boring & Chamfering at the same time and with same cutter however with the same machine facing is also possible.
And with features like Auto Cut & Auto Feed makes it productive and One of a Kind.
 


Monday, 7 January 2013

Taper Turning Attachment

Taper Turning Attachment in Lathe 

The advantage of this method is that long tapers can be machined & is offered by Preet Lathe . As power feed can be employed, the work is completed at a shorter time. 

Preet Lathe manufacturers taper attachment consists of a bracket which is attached to the rear end of the lathe bed. It supports a guide bar pivoted at the center. The bar having graduation in
degrees may be swiveled on either side of the zero graduation and set at the desired angle
to the lathe axis. A guide block is mounted on the guide bar and slides on it. The cross slide
is made free from its screw by removing the binder screw. The rear end of the cross slide
is tightened with the guide block by means of a bolt. When the longitudinal feed is engaged,
the tool mounted on the cross slide will follow the angular path as the guide block will slide
on the guide bar set at an angle of the lathe axis. The depth of cut is provided by the compound
slide which is set parallel to the cross-slide. All Geared Lathe Machine are offered with Taper Turning Attachment.